EVO-STIK Flooring Adhesive, High Strength, Fast Setting, Ready to Use, Solvent-Free, For Use On Porous Floors, 1L

I bought to fix down a few blocks of old parquet flooring under my office chair, and it worked really well. Very pleased I didn't have to buy a huge tub of expensive floor glue.

Does what it says on the tin ,easy to apply and sets quickly

Pleased with the results.. I used on vinyl floor tiles and the end result is good. It did take over 24 hours to dry and was quite messy. This did mean when flooring was laid the tiles could be easily moved and manipulated into place. However. I couldn’t not use the bathroom so had to walk on flooring before set and the tiles continued to move during this time and had to be realigned constantly. Would definitely recommend using on a floor that could be left uninterrupted while setting. Every time I walked on floor residue would squeeze out between tiles and this was sticky and looked messy. A few days on they are set firmly in place and all residue cleaned away, but the process was a bit messy and laborious.

Highly recommend, would definitely use again

Works great

Well this does do the job, but 2 hours dry time? - optimistic at best.I have worked with many adhesives and sealants but I have to say this has to be one of the most awkward and infuriating I have come across.I used it to fix vinyl planks to a synthetic coated insulated floor.I followed the instructions for the first plank, this was a huge mistake. The tile oozed out glue everywhere and sat far too proud, I had to scrape virtually all the glue off. The glue is extremely sticky, you only need a very thin coat not the liberal amount recommended.I found that you had to put on very little and comb it out with the provided scraper.You must clean down as much as you can as you go along, this stuff smears everywhere, I used a cloth covered in sealant remover, this seemed to work well. (TRY IT ON A SPARE PIECE FIRST TO ENSURE IT DOES NOT TAKE THE COLOUR OUT OF THE TILE)Also mind that this glue is supposed to dry in 2 hours, absolutely not. It took 10 days before the tiles were anything like set, this was in a room with an ambient temperature of around 17 degrees. Up until this point glue oozed from the seams as soon as any pressure was applied.On the plus side once the glue had set, it was solid. It dries to a brown finish which for me as I laid light oak coloured tiles was a bonusFor ease of use and drying I would rate this glue 1 star, but because it did eventually dry and stick well I have pushed it up to 3.If I ever had to vinyl tile again, I would certainly be looking for an alternative.

I used this to put vinyl flooring on my cupboard wall, easy to use and works well just a bit messy

I used this for gluing my custom tufted rugs so not the main use case.Worked excellently for this purpose and the rug is able to bend and flex whilst still being firm enough to hold its shape.Easy to apply and dries very strong leaving me unable to pull individual strands out.Like most products of this nature it is very difficult to remove so make sure to wear gloves and protect any flooring etc.Took a large amount of scrubbing to get it off my wrist.