SUNLU 3D Printer Resin, 1kg Fast Curing Standard 3D Resin for LCD DLP SLA Resin 3D Printers, 395-405nm UV Light Curing 3D Printing Liquid Photopolymer Resin, Low Shrinkage, High Precision, 1000g, Grey

Worked really well for the small pieces I needed to print for a friend who laughing his own board game. The color looks great. Nice deep translucent blue, not washed out like a few other popular brands. The smell wasnt as strong as another brand i used so that was a plus. Since i have a magnetic flex plate, part removed very easily. Bumped up first layers to 45 sec. as the flex plate is fairly smooth and adhesion worked out great. Cleaned up fairly easy using 70% alcohol. Cured in 15 min. So far so good but only time will tell. Will be buying again.

Hi Temp.It was clumpy.NEEDS to be heated before use. Place container in hot water, shake, and let it sit until it gets warm, 30 min. This gets the resin in the correct printing state. Its like a different material when given a hot water soak.Failed first print, warmed the container and printed really nicely.45s bottom layer, 4.5s exposure.Qidi Tech S-Box.

It didn't take much testing to figure out the exposure settings. It doesn't have much of a smell, and it does what I need it to do. Most likely going to add a gloss clear top coat to make it more transparent.

I often buy this resin. It's a great material to print with. I rarely have print failures with it and when I do, it's usually weather related. I only wish it came in larger quantities. For colors I don't use as often I can note that the shelf life is great. And overall it has less odor than most other materials I've used.

The resin holds well, and is stronger than the other brands I use (Siryatech, and Elgoo) and withstands dropping quite well. The printing quality is quite good and the finished models are great.I am unsure if I will buy again, as the liquid form has a downside. I keep my resin printer in an unused room in the house with the windows usually open when its printing, and the door closed with a towel to prevent the resin smell from escaping as much as possible . Usually this is enough to keep any odor inside the room and a reasonable level. But even when its just sitting in the pan waiting to be used, it makes me choke a little even with the 3M filter mask I wear when entering the room, and makes the rest of the house smell like the resin as well. I understand that all resins will have an odor, but this one is heavier and more invasive than most.

Viene bien empacada, con plástico protector y sellado. La Resina resulto muy buena para una impresión en una anycubic.

I got the best deal on this resin! Bought it for 16$ and I wish I had stocked up on it when I had the chance!

Arrived in standard packaging, upon breaking the seal - the resin was the consistency of Jello Pudding. Heated up the resin, used a commercial grade paint shaker in order to try and thin the consistency. This resulted in a gradual thinning of the resin.Several failed attempts to calibrate exposure settings according to manufacturer recommendations, could not get a single job to print successfully.Tested exposure with UV lamp, would not coagulate easily and failed to dry out in short time exposure to bright UV lamp.If you need a resin print to glow in the dark, use glow in the dark paint instead. This resin does not lend itself to printing easily or reliably.