H4 Canbus Decoder

I installed some Sylvania 9005LEDSPBX2 LED bulbs in my 2010 Honda Odyssey Touring for the hi-beam/daytime running lights and I got a warning to check the DRL system. I put this inline and the warning went away and DRL, hi-beam (and low beam which were comparable 9006s) continued to work just fine. I actually only needed to put one in to make the warning go away, (driver side), but did both and wire tied the "box" down to the diagonal chassis piece that goes nearby the bulbs. (we'll see how that lasts). I didn't have a flickering problem, just the DRL warning. Worked great, easy to install.

I upgraded to LED headlights on my 2003 Dodge Ram and needed this canbus decoder to make them work properly. I tried to plug in the LEDs without the decoder and had issues with flickering. I had no issues after connecting the decoder.

This might be the worst product that ever says it will fix it it does not fix the lights from Stroing in a 2012 mini Cooper don’t ever buy it for that it won’t work

Worked as expected. Great quality

this device solved my LED headlight flickering issue, very easily installed, i read reviews that the device didn’t solve their flickering issues but it did mine. maybe it’s not for every vehicle as advertised but it worked for an ‘08 Patriot.

Nice construction and easy install but it did not 100% eliminate my bulb out warning on the dash from installing LED fog lights. The warning light would come and go depending on the day.

Stopped the flickering on my 2013 Mini Countryman. To install it I had to get 2 extensions to be able to splice it on the outside of the light case. There was no room in my aftermarket headlights.

First off. Only a handful of people stated the type of vehicle they are buying these for so I was a little iffy. But I have a 2016 jeep compass. And my led headlights kept flickering to the point I just wouldn’t drive at night. It has stopped ALL flickering. It was compatible with my jeep. The product seems durable but not sure yet time will tell. The only thing that would have been better is if it came with longer zip ties. But other than that it fit and done it’s job!

I installed this decoder to fix a slight flicker I was getting in my high beam bulbs when they were running as daytime running lights (DRLs) on my 2007 Toyota Camry. It worked exactly as expected — the flicker is completely gone on the side where I installed the decoder. To test it, I recorded a short video: the left headlight (without the decoder) still shows a faint flicker, while the right one (with the decoder) is perfectly stable. The difference is clear. If you’re upgrading to LED bulbs and notice any flickering, especially in DRL mode, this little unit is definitely worth it.

Solociono el testigo de las luces en un focus 2012 MK3 lo único malo es que es un lío volver a montar todo los estaré probando un tiempo si fallan actualizo esta reseña

This solved my Canbus error in the VW. Much preferred over the low tech load resisor solution (if it works which it didn't in my VW). Just gets warm in operation and therefore does not require any special mounting considerations. Connectors and wiring are high quality and very rugged.

Las luces funcionan muy bien, sin esto se apagaban de repente, y ya no ocurre eso

Me sirvió para el buen funcionamiento de luces led en una Jeep Compass 2016.