





Illuminate Your Projects! 💡
The Seamuing I2C OLED Display Module is a compact 0.91-inch blue display with a resolution of 128x32 pixels. It operates on a voltage range of 3.3V to 5V and features I2C communication for easy integration with various microcontrollers like Arduino, ESP8266, and STM32. With a wide viewing angle and extreme temperature tolerance, this module is ideal for diverse applications.
| ASIN | B076BJZ42H |
| Brand | MakerHawk |
| Colour | As Shown |
| Connector Type | Screw |
| Connector type | Screw |
| Customer Reviews | 4.4 out of 5 stars 264 Reviews |
| Item Weight | 0.02 Pounds |
| Manufacturer | MakerHawk |
| Manufacturer Part Number | X6133951UENUN1207 |
| Model Number | 190033896869 |
| Number Of Poles | 128 |
| Number of Positions | 1 |
| Number of poles | 128 |
| UPC | 190033896869 |
| Voltage | 5 Volts |
P**G
Simple, Versatile, Clear, Inexpensive, Robust, Reliable, & Well Documented
These displays are almost essential for prototyping microcontroller based projects. They take up little space, are very bright and sharp, easy to connect via I2C, and consume little power. I have run a Pico, with a BMP280 temperature and sensor module and one of these SSD1306 OLED displays from a 2200mAh power bank, and had it run over 56 hours continuously, with the display on constantly. I'm afraid the video with this review is not well focussed at times, but does briefly show how bright and sharp display is. These displays are well documented too. I was concerned when it was delivered without any instructions or datasheets, but there are so many tutorials and other resources about these displays on-line that it didn't matter at all. They are commonly used with Raspberry Pi, Pico, Arduinos of all types, and many other microcontrollers too. I'm currently working on a project to wirelessly connect a Pico and an Arduino Nano, each with an SSD1306 display, and have them play TicTacToe against each other in a hopeless infinite loop of stalemates - just like in the Mathew Broderick movie 'War Games'.
M**S
Good clear display
This is a nice clear display. Got working very easily using the excellent Adafruit SSD1306 and GFX libraries. All in all very pleased. I should point out (something I did not realise or pick up from the specs) that the displays are minuscule (about 3.5cm x 1cm). That's not a criticism, the displays are clear and legible but something that is worthwhile noting in case you were expecting larger - when I received the package my initial thought was "oh it's empty". The one very minor negative that I have is that the displays did not come with connecting pins. Fortunately I had some spares and soldered them on, however, for the cost that is relatively minor.
R**K
Bright and clear!
Tested and worked the first time, no issues. Display is surprisingly very bright and clear for its size. Does not come with a 4 pin connector but honestly this is not necessary as soldering one will only increase the display footprint and one is better-off soldering wires directly to the display. Overall a great item at this price, will buy again.
S**T
Works well and easy to use
It was a quick job to solder the headers on and wire it up to my Pi and extremely easy to get working with node.js. The display is bright and crisp. In short, it's a good tiny display screen for displaying simple information.
N**G
Works very well but received one faulty device
Bought two of these but one was faulty. The other works perfectly. Of course I used the faulty one first and spent a few hours scratching my head until I debugged it to find I couldn’t communicate with it at the Wire level. Will see if I can get it replaced. Changing my review and rating here because I contacted the supplier, provided them with details of my problem and they are refunding me for the faulty one. Can’t complain with customer service like that. Well done and thank you.
H**N
Pay attention to size
Item(s) arrived promptly and was well parcelled. Although clearly stated in the listing, these screens were much smaller my expectations and smaller than the images depicted.
M**K
Good
Not tried them yet but look nice and we'll made
I**B
Great little devices
I've bought a number of these now (from a range of suppliers on Amazon) for small homemade gadgets. They're dead easy to use and quite effective. Highly recommended if you just want a small-format display.
C**O
Perfect display - quick delivery - really good seller - Display perfetti -spedizione rapida - ottimo venditore
Really good seller, also products are well well made and worked immediately. Display specs are well described and received display has all that was declared in description page. Excellent contrast and brightness - Zero pixel defect. Package : perfect. Communication with seller is easy. I will surely buy again, Who work as MakerHawk deserve this! Realmente un ottimo venditore. Anche i prodotti sono realizzati davvero bene ed hanno funzionato immediatemante Le specifiche del display sono descritte con cura, ed i display ricevuti ricalcano quanto dichiarato nella descrizione Contrasto e luminosità eccellenti. Zero pixel rotti. Imballo perfetto Comunicazione col venditore facile Comprerò sicuramente ancora da loro. Chi lavora come MakerHawk lo merita Per usare un modo di dire anglosassone "Easy Peasy Lemon Squeezy" - Facile e veloce come fare la spremuta di limone!
R**S
Fait le boulot!
Utilisé avec la biblio. Adafruit ,l'écran est très simple à mettre en oeuvre, SDA et SCL ... La doc. propose de l'alimenter en 3.3v mais il fonctionne sans surchauffe ou comportement erratique en 3.5v ou 5v et 500mA. La taille réduite permet de l'intégrer aisément sur des montages arduino robotiques , à noter qu'il faut souder soi même les 4 pins avant utilisation, Ravi de cet achat!
O**E
Tout marche au poil
Pour le code j'ai selectionné: U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI Ca a marché tout de suite,on a 3 lignes avec la police : u8g.setFont(u8g_font_unifont) 1ere ligne : u8g.drawStr( 0, 10, "blabla") 2eme : u8g.drawStr(0,22,"blabla") 3eme : u8g.drawStr(0,32,"blabla") si on fait (0,33),ca sort de l'affichage vers le bas Apparemment l'oled ne reconnait pas "clear" et "print",et la fonction : u8g.drawStr doit etre une fonction proprietaire. C'est quand meme beaucoup plus petit que je ne le pensais,mais l'affichage est bien lisible.
S**O
Buon prodotto.
Buon prodotto. Funzionano bene. La confezione era un po' troppo leggera. Temevo che si fossero stortati i pin, ma invece tutto ok.
S**C
Bien, mais un peu cher, fiches Dupont non fournies
Fonctionne bien, aucun souci. Je n'ai pas mis 5 étoiles car c'est un peu cher (on peut en trouver le double au même prix, mais avec une livraison bien plus longue), et il faut soi-même fournir les connecteurs Dupont (ou souder directement des fils dessus). Sinon, rien à dire, très bien, fonctionne sur raspberry pi et sur un Gotek avec FlashFloppy sur un vieux synthétiseur.
Trustpilot
1 week ago
1 week ago