DuraSteelHeavy Duty Wall Mount Shelf - 36" Wide x 14" Deep Classic Stainless Steel Wall Floating Shelves - NSF Metal Storage Wall Shelves - For Commercial Kitchen, Laundry Room, Garage, Food Truck

First, the shelf itself is amazing. Excellent quality, solid metal. So everything should be good, right?WRONG.The hardware that comes with this shelf is entirely inadequate. DO NOT INSTALL the shelf with the provided screws and anchors. The seller says that the shelf can hold up to 300 lbs evenly distributed. That claim seems fair with proper installation hardware; however, the shelf CANNOT EVEN HOLD ITS OWN WEIGHT with the screws and anchors provided.Why, you ask?Because the screw heads, which are intended to be flush with the shelf when installed are SLIGHTLY SMALLER THAN THE HOLE IN THE SHELF. This means that the screws can just slip through with the slightest touch. And then the shelf falls down.Furthermore, the plastic anchors provided are very flimsy and more appropriate for holding something 15 lbs or less.In summary: shelf good, hardware bad. Prepare to buy your own screws and anchors, otherwise this shelf is extremely dangerous and unfit for use.

i ordered 2 of these shelfs one 60" and one 48"first the "boxes" they came packaged in were inferior to protect them sufficiently for shipping and both arrived slightly damaged with holes in their boxes.however they were both shipped out on time if that helps lol. i picked both units out to fit in my shed and measured from stud to stud for mounting purposes and ease of installation since i have exposed studs they should have just bolted up and been done, this however was not the case. the 60" is actually 58& 3/4 and the 48 had the screw holes at 40 apart. so it was a time consuming pta to drill every mount hole to properly be installed fyi stainless is a pta to drill due to its hardness.now the mounting hardware screws and plastic expanders seem like they would be OK if you are mounting to sheetrock and you only want to put 50lb or so on the shelves, so that being said i had to get my own screws,bolts and washers. the 60" shelf only came with 2 shelf support triangle mounts, wtf guys why only 2 it really needs 3 or even 4. the 48" came with 3 and that seems sufficient to hold 200lb or more easily if you use good fasteners and bolt to studs properly.i spent 4 hours putting these things up and the way i did it i would say they would hold 300lb each or more safely, remember i also added more supports, used my own fasteners and added more holes to attach to more studs increasing rigidity and strength. recap is get your own fasteners, high quality drill bits, drill and other tools required to mount them properly, some of the edges may be sharp, the shelfs are bent not cut and welded so some sections are not the proper 45 degrees to flush mount (back of the shelf) making a perfect flat mount difficult. i chose these over the other usa made ones offered on amazon due to cost, hind site i shoulda got the usa made version lol. but these should last a very long time and support everything i throw on top.

It might make some of you happy to find out that there is indeed a center brace. The reason I ordered this particular one is because the main picture showed it without a center brace. I did not want a brace in the middle. You don't have to use the center brace, but you have these unremovable bolts sticking down in the middle that are an eyesore. Also, there was a lot of scratches on the finish. One other note, you will have to use the Included plastic anchors because studs in the wall are not spaced to match the holes. I'll go ahead and give it two stars because it is at least a very sturdy shelf, although I wouldn't put much weight on it since the only thing holding it to the wall is the plastic anchors.

We purchased this as a temporary solution. We plan to remodel our kitchen in the next year and our over the stove microwave stopped working. Using this shelf and a counter microwave in the meantime.

This shelf is strong enough, and the perfect size, to mount a lithium battery in a Camco box, for an outdoor, off-the-grid solar application. We actually mounted the shelf upside-down, and spray painted it (and the Camco box) with Rustoleum paint, to protect it and make it look nice in our application. Upside-down, the shelf has edges that help hold the battery securely, and there were sufficient screw holes to allow us to attach the shelf tightly to our beam. We drilled one drain hole in the shelf. This application is not necessarily what was intended for this shelf, but it is exactly what we needed, and the shelf did not deform under the heavy battery load.

Super sturdy. We have a clean modern apt kitchen in NYC and this is our second one just like it. We have them set up both utilitarian and decorative at the same time in the kitchen. They hold a lot of weight and Im never afraid of it coming down. We hosted for the holidays this year and it was nice to have our kitchen organized and several guests complimented how nice they were. Def a solid purchase to get this organized and clean!

I’m giving it a 2 star review simply because when they arrived the box wasn’t damaged and the shelfs had bends in them that I had to hammer out myself in order for them to properly be hung. As you can see in the photos. I don’t know if they just didn’t care when packaging these because I’d say that those are easily spottable. Any person in quality would be able to see that there is a bend where there shouldn’t be one. Lol for $260+ tax you’d expect perfect not damaged. BUT over all assembly, installation of the two shelf’s went smoothly and they’re very aesthetic. However I did remove their logo stickers bc I think they look better plain.

I opened the package and began to put the item together so that I could open my shaved ice concession shack-only yo have themetal edges bent and I am now unable to put the shelf together without attempting to pry the metal back to original shape. Thus delayingplacing this as my serving window of my business.

Shelves are durable and easy to mount. They arrived extremely scratched with some machine damage to the steel. If you are using them in an industrial kitchen they are great. If you are using them in your home they may not be the right fit.

J'ai reçu que deux produis sur 4

👍👍

Took 4 weeks to receive and shelves was not finished!! No quality control...

heavy duty unit finish ok but not perfect