Jaronx for BMW 3 Series E90/E91 Door Handle Replacement Kit, Passenger Outer Cover+Pull Handle for BMW 316 318 320 323 325 328 330 335 (2004-2011)(Right Side,Pull Door+Outer Cover)

If you drive a BMW 3 Series E90/E91, you already know the interior handles tend to peel over time. This replacement bracket was a lifesaver. It fit my 2009 328i perfectly—snapped right into place without any extra tools. The plastic feels durable, and the install took me under 20 minutes. It gave my car a cleaner, more polished look instantly. Way cheaper than going through the dealer. 💡 Pro tip: Pair it with a soft-touch cover if you want an OEM feel. Highly recommend if your handle's falling apart or looking rough.

Came out pretty good. Fitment was solid. No issues with putting on. Matches the OEM and it’s pretty close to feel. I would make sure to watch a video on how to take the door panel off because there are some wires on the back that you don’t wanna mess up.

Perfect replacement, the original one was sticky and goey

Product looks good. Attachment hardware looks poor (very tiny screws). Packaging was very bad (this fragile plastic part was packed in a plain, unpadded envelope).

The original rear door handles on my 2008 BMW 328i (E90) have started to melt and become super sticky, leaving black goo on your hands when pulling the door closed (see attached picture). These aftermarket replacement door handles were easy to install, it's getting the old inner ones off that was difficult (they are plastic welded into the door panel at the factory by BMW). Once the door panel is removed, I found that using a 5/16" drill bit from the back of the panel to drill out the old, plastic welded door handles worked best. I tried a Dremel at first, but there just isn't enough space back there. I installed the new ones with the screws provided, but added a small fender washer as I didn't want the handle to rip out of the soft door panel material. Please note: Be sure to purchase a pack of the "Rexka 20pcs Interior Trim Moulding Door Retainer Trim Finisher Clips" at https://a.co/d/8HM0QOP as you are going to break several of them in the process of removing the faux walnut door trim. Good luck!

I recently bought a cheap 335i and cannot figure out what the previous owner was thinking by duct taping the passenger handle together. It was disgusted and an eye sore. His clobbered "fix" slowed the install down trying to cut the clamshells free from each other, but the end result was well worth it. It matches the black interior very well. Can't say it was an easy part to install since the door card has to come off, but that's no fault of the replacement manufacturer, that's all on BMW's "amazing" engineering. It fits just like OEM and is sturdy to grab. Be prepared to break a couple door card clips, it's inevitable, but the torx screws do all the heavy lifting at keeping things together. Take your time and be patient. You'll have to remove: door latch cable, door lock rod, tweeter speaker wire, side speaker wire, window switch wire, and if you have the comfort access lighting (the BMW logo illumination when you open the doors), you gotta watch out for that wire as well, I almost forgot it and crushed it when shutting the door. It's black and really small. Overall, I'm happy with the outcome especially for the price.

As shown in the picture, the handle of my 2011 BMW 328i was totally melted and disgusting, leaving sticky black residue every time I touched it. I couldn’t take it any more so I ordered this kit. After watching some YouTube videos, I decided to take a stab at the install. It would have taken me less than 30 minutes, except I had to pause midway and go get some 3/8 washers from the hardware store because I didn’t feel like the head of the little screws that come with it were wide enough to hold it into the holes. You will need to get these, a 1/4” drill bit to drill out the plastic rivets and a slim pry tool for the door panel will help as well. Also, you might want to get some extra trim clips and panel clips. I broke one of the trim clips off when pulling off the wood grain, but luckily I had a pack of extra ones and was able to pop it right in and keep going. The finished results are great, as shown in picture. The replacement handle is made of a hard plastic and not a rubber so it won’t be melting again. If you have a melty handled e90 or e92, this is a cheap and effective way to solve the problem.

If you don't want to spend for OEM and don't care about the rubber feel of the original, this is perfect. I am impressed with how solid it feels. The screws holding it in versus the original melted plastic rivets make total sense. It looks 100% stock - I didn't replace the rear ones (not melted yet) and this one on the front passenger door fits right in. Time will tell about durability. I am very happy with the product so far.

Perfect Keep in mind, the replacement process requires a 5/16" drillbit and some jbWeld to replace

純正が加湿分解でボロボロになり購入しました。造りがしっかりしていて、サイズもビッタリで問題なくつきました。

Me gustó mucho el producto, llego antes de tiempo y quedo perfecto, la instalación es bastante sencilla y el producto es de muy buena calidad, va a durar mucho tiempo.

These handles saved my car handles. Perfect fit.

These fit perfectly (I got the kit). It does come with the screws, and the front and back pieces for all door handles when buying the 3 piece kit. You'll want a panel removal tool, and I would recommend buying a pack of the panel connectors for both trim and door panels since more often than not at least one is broken. The look of them is great, and they are sturdy. Be careful that you heat up and remove enough of the backing on where the handle connects to the panel before trying to pull them out as you could damage the hole where the screw needs to hold.