🚀 Upgrade your Chevy’s stance and efficiency—drive like you own the road!
This front bumper air dam lower valance is a direct-fit replacement for 1988-2000 Chevrolet C/K 1500, 2500, and 3500 trucks. Made from durable plastic with a primed black finish, it improves aerodynamics by reducing drag and increasing downforce, enhancing fuel efficiency and driving stability. Designed without tow hook holes, it’s perfect for restoring or upgrading your classic Chevy’s front end with a sleek, ready-to-paint surface.
| Brand | CarPartsDepot |
| Auto Part Position | Front |
| Material | Plastic |
| Color | Black |
| Item Weight | 9 Pounds |
| Vehicle Service Type | Trucks |
| Exterior Finish | Ready To Paint |
| Product Dimensions | 12"D x 60"W x 9"H |
| OEM Part Number | 15569428 |
| Automotive Fit Type | Vehicle Specific Fit |
| Manufacturer | CarPartsDepot |
| Item Weight | 9 pounds |
| Item model number | 350-15105-10 |
| Manufacturer Part Number | 350-15105-10 |
| ABPA Partslink Number | GM1090108 |
| Special Features | 15569428 GM1090108 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 Compatible With Chevrolet Compatible With Chevy C1500 Suburban C2500 C3500 C3500HD K1500 K2500 K3500 Tahoe For Models Without Tow Hooks and Sport Level Trim Old Body Style Front Extended Cab Pickup Standard Cab Pickup Sport Utility Cab & Chassis Crew Cab Pickup Cab & Chassis - Conventional Cab & Chassis - Crew Cab 6Cyl 8Cyl 4.3L 5.7L 6.2L 5.0L 7.4L 6.5L 4.1L Scottsdale Silverado Cheyenne WT 454 SS Base LT LS Vala |
D**?
Great Fit, perfect product hands down
Perfect Fit
A**R
Looks Great
Granted, this may not come with hardware, it is as simple as 10 S/S bolts, washers and lock nuts and you are in business. The holes for the tow hooks do look a little crude from the back side, as you can see, it looks great/factory when installed, its a $40 part that looks like $200, this IS NOT hard to install at allFor the money = GREAT PRODUCT
A**R
ready.
Looks clean and easy install.
G**1
Some fitment issues
Overall dimensions are good, fits under the bumper spot on. The issue are the holes in the valence (alignment) to the factory holes in the bottom of the bumper. There are about 10 holes and 4 are a tough fit. 6 of the 10 fit, but 4 screws are off a bit and had to go in at an slight angle. Once tightened, the 4 screws did straighten up a bit. From the outside, all looks fine. Alignment with the factory tow hooks look ok as well if you have them (I did not have). Overall, pleased for the results vs. the cost. I did not use the factory screws from my old valence remains, just too corroded. I used some 10-32x 3/4 with washers and ny-lock nuts.
M**T
Crap, Junk, Does Not fit
This Is junk. It does not fit. it is about an inch short on ends. the holes don't line up, the mounting flange is bent and makes putting in fasteners extremely difficult, that is after you drilled some new holes for fasteners because they don't line up to the bumper. There is horrible casting lines where plugs for tow hook and light holes were. Do Not buy, you will have much better luck finding something that fits and looks better from a junk yard.
D**
As described
Great item
M**Z
Very nice
For exactly how stated.
C**O
poorly aligned warped product
the edge where the piece attaches to the bumper is warped and the holes do not align well. I could not use the original clamp pieces except at the ends. I had to us bolts and tighten a nut down to get the dam to pull towards the bumper holes and out of the seven attachments, was able to get 5 . What should have been a fifteen minute exercise turned out to take me several hours. Old truck so it looks fine and will stay in place and did not want to hassle with a return. Just could have, should have, been easier to attach.
Trustpilot
2 weeks ago
2 days ago
