NEW WR55X10942 Replacement Control Board Compatible for GE Refrigerator, PS2364946, WR55X10942P, WR55X11130, WR55X10552, WR55X10656, WR55X10996, WR55X11072, 200D4852G010 Primeco Brand - 1 YEAR W

This replacement computer worked well. Once installed, the refrigerator cooled and freezer function was restored. Good value, and the repair man completed the function with ease and timely. I’m happy I was able to acquire this replacement so my refrigerator is back to normal.

Simple to replace the board, works good as new.

This part revived my refrigerator and saved me from needing to buy a new one. Noticed the ice maker began to work intermittently, then the indicator light would fade out and it would not dispense ice at all. I noticed the compressor and fan suddenly stopped running. Determined it was the control board. The new one had a couple extra components that the old one did not, but this also was the updated part that is used in other refrigerators as well. It was easy to install. It has been a few days since I've replaced the part and so far so good.

Drop in replacement for a board identified as faulty. Half the cost of the GE official replacement board. Make sure you connect all the harnesses connected properly and that the original board didn't fail due to an issue somewhere else (new board will obviously just fail too)

Easy install. Works as it should.

This worked like a charm for my bottom-freezer GE refrigerator Model gdsl3kcycrls, whose control board was fried during a power outage last week. In that outage, one of the resistors that is part of the "snubber" circuit to protect the evaporator motor was burned, the one next to it that apparently protects the condenser fan was not. See the picture of my old board, attached. I tested both fans and they worked fine, but the board was fried. IMPORTANTLY, on my model, the left-most connector that goes to (what I believe is) J5 is only a 5-pin connector. It has orange, red and purple wires. The new board has a 9-pin connector. So I had to trim off the little piece of plastic on the housing of the female connector and plug it in to the last 5 pins of the 9 pin connector that is on the left side of the new board, sitting there all by itself next to the 3 power pins. It's obvious which end this 5-pin connector should be attached to, because the second pin is missing on the female and male connectors. The fridge won't work if you don't connect this connector.

So my 2013 GE fridge stopped producing water. I changed the filter and that didn't fix it, I replaced the water inlet valve and right away that seemed to have fixed the problem. Worked fine for the rest of the night. Next morning water didn't work again and also the freezer and fridge temp were warming. - Decided to call a repair guy. $90 to show up took it apart with me testing things and put back together and as we plugged back in I noticed the freezer evaporator fan came back on which was new, immediately tested the water dispenser and it worked also. Everything is working! (due to power reset somehow?) He said he thinks it's the main board and it will stop working again but for him to order the part it's 3 weeks out on back order. - I order this part on Amazon hoping it fixes everything, the morning after ordering it stops dispensing water again and the evaporator fan isn't running. Anxious for the parts arrival. Got it today and swapped it out. Still have both problems, water doesn't run and the evaporator fan isn't running when should be. Don't know what to do but apparently the board didn't fix it? Any help appreciated.

I am always happy with used books and hand me down clothes and like to save a buclk whenever I can. I initially bought this component on a warehouse 'deal' and it was worthless; not even packed inside the anti-static bag, no bubble wrap, flopping around in the box in a plastic shipping bag (a source of static) and needless to say did not work. We suspect it may even have been a bait and switch.So I tried again with a NEW one. It arrived in perfect condition INSIDE the antistatic bag TIGHTLY PACKED with bubble wrap and installed it. Now our 17 year old fridge is working like new again! It has even started making ice again which it hasn't done in over two years! (In spite of a new ice maker…)It was super easy to get to and to replace so if you have an appliance in good condition but maybe isn't making ice anymore or if you are noticing extreme temperature fluctuations don't wait until it stops sending power to the compressor, replace the main control board and save yourself a serious headache!Our refrigerator is a GE Model GSS25IFPDWW from 2004 and this is a compatible part (obviously if you've read this far) it really is like a brand new machine since we installed this.